DT Swiss XRC 1501 Spline庐 One 30 Carbon CL Boost 29″ Front Wheel Outlet

DT Swiss sticks to its principles and presents the XRC 1501 Spline^庐 One 30 Carbon, a mature and well designed cross-country wheel that is light, comfortable and fast at the same time. With a 30mm rim width, the XRC 1501 is wider than its predecessor (but puts less weight on the scales) and therefore offers more tyre support. This allows the tyre pressure to be reduced, which means greater rolling resistance on rough terrain. As you can see: The XRC 1501 Spline^庐One is a round thing all around!

Concerning mountain bike wheels lighter means wider: XRC 1501 Spline^® One Boost

Cycling is physics. During cornering, lateral forces impact the tyre. The tyre contact patch moves in the opposite direction to the lateral force. When cornering with a narrow rim, the tyre contact patch moves sideward and is not supported through the rim. This results in an unstable riding experience. The resulting folding in the tyre creates tension and the tyre pulls to the opposite bead. This causes a loss of air between the tyre bead and the rim bed, a so-called tyre burping. The tyre contact patch of the wide rim is inside the rim flanges. The side wall of the tyre is supported by the wide rim, which increases control. A wider rim can therefore be ridden with lower air pressure than a narrower rim.

And lower air pressure means less rolling resistance. A wheel with low tyre pressure will always roll over rough surfaces more easily than a wheel with high pressure, as the tyre is able to adapt to the ground. A wheel with a high air pressure cannot absorb obstacles and the bike must move upwards, comparable to lifting work, which increases rolling resistance. Less air pressure leads to less fatigue, as the rider has to invest less lifting work.

Product features – XRC 1501 Spline One 30mm Carbon

• Use: Cross Country
• Model: XRC 1501 Spline One
• Wheel size: 29″
• Rim diameter: 622mm
• Rim type: Clincher
• Tubeless ready: ✔
• Inner width: 30mm
• Outer width: 36mm
• Axle system: Boost 15/110mm (Thru Axle)
• Hub Type: 240 Straightpull
• Rim: Carbon, hookless bead, UD finish
• Spokes: DT Competition Race^® straightpull (black)
• Nipples: DT ProLock^® Squorx ProHead (black)
• Holes/Spokes: 28
• Lacing: 3-cross (1:1)
• Valve hole: Presta / SV Ø 6.5 mm
• Disc Mount: Center Lock incl. IS 6-bolt adapter MTB
• Recommended system weight max: 110kg (body weight + bike + equipment)
• ASTM Classification: 3

Material

• Rim: Carbon
• Hub: Aluminum
• Spoke: 18/10 Stainless steel
• Nipple: Aluminum
• Freehub body: Aluminum

Color

• black

Weight

• approx. 728g (manufacturer information)

Scope of delivery

• XRC 1501 Spline One 30 Carbon CL Boost 29″ Front Wheel
• Tubeless tape 32mm
• Tubeless valve aluminum black 18-25mm
• IS 6-bolt adapter MTB